What are the steps for configuring the HIKOB INSTANT EVSE kit?

HIKOB INSTANT EVSE kit is delivered ready for installation and commissioning. No configuration is required before installation. The two HIKOB WISECOW-P sensors are already paired with the HIKOB GATEWAY LITE-P and each of them is associated with one of the dry contact outputs.

What are the steps to configure my HIKOB INSTANT EVSE system?

You can configure the system via the RS 232 serial link whose API is fully documented. To simplify these steps, HIKOB offers you to go through the application NETPULSE APP delivered ready to use on a WINDOWS tablet to simply connect to the HIKOB GATEWAY LITE.

How to associate (pair) an HIKOB WISECOW-P sensor with a HIKOB GATEWAY LITE-P ?

HIKOB devices added to the connection list (dedicated “white list”) of a gateway connect to it automatically and exclusively. The “Connection list configuration” menu of the NETPULSE APP application defines a list of HIKOB devices that can connect to the HIKOB GATEWAY LITE-P.

How do I assign a sensor HIKOB WISECOW-P to an output?

NETPULSE APP application provides a menu for assigning each of the sensors connected to the gateway to one of its outputs. Each of the four outputs can be assigned to only one sensor.

Can I configure the HIKOB WISECOW-P sensors in my system?

NETPULSE APP application provides a menu for assigning each of the sensors connected to the gateway to one of its outputs. Each of the four outputs can be assigned to only one sensor.

Is it possible to configure the output states (open/closed) according to the different states of the places (free/occupied)?

The “Output status” menu of the NETPULSE APP application is used to define the correspondence between the measurement status (“free” / “occupied”) and the output status (“open” / “closed” . The output status is “occupied” by default but can be changed to “free”.